Difference between revisions of "Security Levels"

From King Arthur's Gold Wiki
Jump to: navigation, search
(→‎Basics)
 
(27 intermediate revisions by 5 users not shown)
Line 1: Line 1:
 
{{Build
 
{{Build
−
|Version = 454
+
|Version = 1865
 
}}
 
}}
 
<onlyinclude>
 
<onlyinclude>
Line 6: Line 6:
 
There are default, hardcoded levels setup but it is strongly advised that server owners take the time to setup their own specific seclev definitions.
 
There are default, hardcoded levels setup but it is strongly advised that server owners take the time to setup their own specific seclev definitions.
 
</onlyinclude>
 
</onlyinclude>
−
=Basics=
 
−
<p>The contents of the file <code>securitysetup.cfg</code> in <code>kagServer/Base/Security</code> (where kagServer is the path to the kagServer's directory) should look something like this:</p>
 
−
<pre>
 
−
# Security setup
 
  
−
# Set to 1 to allow only the names in the whitelist or 0 to disallow the names in the blacklist
 
−
whitelist_active = 0
 
−
whitelist_file = Security/whitelist.cfg
 
−
blacklist_file = Security/blacklist.cfg
 
  
−
# Path to file where security levels are defined
+
=Basics=
−
seclevs_file = Security/seclevs.cfg
+
<p>The contents of the file <code>autoconfig.cfg</code> in <code>kagServer</code> (where kagServer is the path to the kagServer's directory) should look something like this:</p>
−
</pre>
+
<syntaxhighlight lang="ini" enclose="div">
 +
security_whitelist_active = 0                                            # Set to 1 to allow only the names in the whitelist or 0 to disallow the names in the blacklist
 +
security_whitelist = ../Security/whitelist.cfg                          # The file with the whitelist config
 +
security_blacklist = ../Security/blacklist.cfg                          # The file with the blacklist config
 +
security_ignorelist = ../Security/ignorelist.cfg                        # The file with the ignorelist config
 +
security_seclevs = ../Security/seclevs.cfg                               # The file with the seclev config
 +
</syntaxhighlight>
  
−
<p>The contents of the file defined by seclevs_file should look something like this (with additional commenting):</p>
+
<p>The contents of the file defined by <code>seclevs.cfg</code> in <code>kagServer/Security</code> should look something like this (with additional commenting):</p>
  
−
<pre>
+
<syntaxhighlight lang="ini" enclose="div">
 
# If 0, defers to hardcoded settings
 
# If 0, defers to hardcoded settings
 
levels_active = 1
 
levels_active = 1
  
−
# Level file paths go here as a ;-delimited list
+
# The default level (that users will be assigned if they do not match any of the other levels) is the last one in this list.
−
levels_files = Security/superadmin.cfg; Security/admin.cfg; Security/guard.cfg; Security/vip.cfg; Security/premium.cfg; Security/normal.cfg;
+
levels_files = ../Security/superadmin.cfg; ../Security/admin.cfg; ../Security/guard.cfg; ../Security/vip.cfg; ../Security/premium.cfg; ../Security/normal.cfg;
−
</pre>
+
</syntaxhighlight>
  
 
<p>If you set levels_active to 0 or the file is otherwise missing/unreadable, then [[#Default Levels|default, hardcoded seclevs]] will be loaded for you.</p>
 
<p>If you set levels_active to 0 or the file is otherwise missing/unreadable, then [[#Default Levels|default, hardcoded seclevs]] will be loaded for you.</p>
Line 37: Line 35:
 
<p>The contents of one of the files defined by levels_files should look something like this (all lists are semi-colon-delimited):</p>
 
<p>The contents of one of the files defined by levels_files should look something like this (all lists are semi-colon-delimited):</p>
  
−
<pre>
+
<syntaxhighlight lang="ini" enclose="div">
 
name = Name of the seclev
 
name = Name of the seclev
 
users = usernames; go; here;
 
users = usernames; go; here;
Line 43: Line 41:
 
commands = rcon; commands; go; here;
 
commands = rcon; commands; go; here;
 
features = features; go; here;
 
features = features; go; here;
−
</pre>
+
assign = seclevs; go; here;
 +
</syntaxhighlight>
  
−
<p>The name variable simply provides the human-readable name of the seclev.</p>
+
<p>The <code>name</code> variable simply provides the human-readable name of the seclev.</p>
−
<p>The users list defines usernames that will match to this seclev (if they haven't already matched to a seclev higher up the list).</p>
+
<p>The <code>users</code> list defines usernames that will match to this seclev (if they haven't already matched to a seclev higher up the list).</p>
−
<p>The [[#Roles|roles list]] defines roles that will match to this seclev (if they haven't already matched to a seclev higher up the list).</p>
+
<p>The [[#Roles|roles]] list defines roles that will match to this seclev (if they haven't already matched to a seclev higher up the list).</p>
−
<p>The [[#Commands|commands list]] defines the rcon commands that players matching this seclev have access to.</p>
+
<p>The [[#Commands|commands]] list defines the rcon commands that players matching this seclev have access to.</p>
−
<p>The [[#Features|features list]] defines the seclev-controlled features that players matching this seclev have access to.</p>
+
<p>The [[#Features|features]] list defines the seclev-controlled features that players matching this seclev have access to.</p>
 +
<p>The [[#Assign|assign]] list defines the seclevs that players matching this seclev are able to assign other players to/from.</p>
 +
 
 +
 
 +
<p>If you make a change to your seclevs and want to reload the new configuration you can do so without restarting your server - just use /rcon /reloadseclevs (or /reloadsecurity) in the console (make sure you have access to that command in your seclev!</p>
 +
<p>You can see all the currently loaded seclevs and who of the currently active players has been assigned to what seclev by using /rcon /printseclevs (you will need access to the command to use this, and access to the feature view_console to view the list)</p>
 +
 
 +
 
 +
<p>A set of example seclev definition files has been included in your <code>kagServer/Base/Security</code> directory, with the extension .cfg.example. If you make a copy of these files and remove the .example extensions you will be left with a good start point for building up your own definitions.</p>
  
 
=Roles=
 
=Roles=
−
<p>Roles are essentially special flags that define something about the user. There are 4 available: premium (premium players), guard (KAG guards), kagstaff (KAG staff) and rcon (people logged into rcon). So if you were to have 'roles = guard; kagstaff' in a seclev, then all guards and members of the KAG Team would be matched to that seclev, if they hadn't already matched a seclev higher up the list.</p>
+
<p>The roles list defines roles that will match to this seclev (if they haven't already matched to a seclev higher up the list).</p>
 +
<p>Roles are special flags that define what kind of user a player is.</p>
 +
<p>There are 4 available: premium (premium players), guard (KAG guards), kagstaff (KAG staff) and rcon (people logged into rcon).</p>
 +
<p>So if you were to have 'roles = guard; kagstaff' in a seclev, then all KAG Guards and members of the KAG Team would be matched to that seclev, if they hadn't already matched a seclev higher up the list.</p>
 +
<p>The only one that can change mid-game is rcon, which will be active when a player logs into rcon (/rcon /login [password]) and become inactive again when they logout (/rcon /logout).</p>
 +
 
  
 
=Commands=
 
=Commands=
 +
<p>The commands list defines the rcon commands that players matching this seclev have access to.</p>
 +
<p>For example, to enable the rcon command /kick, used for kicking players from the game, you would add 'kick' to the commands list</p>
 +
<p>There is one special keyword used for enabling all rcon commands at once - 'ALL'. So in this case your commands list would look like: <syntaxhighlight lang="ini" enclose="div">commands = ALL;</syntaxhighlight></p>
 +
<p>Scripting commands (like waterLevel()) are not compatible with this system - if you want to use them you must have a seclev with the ALL keyword in its commands list</p>
 
<p>A full list of available rcon commands can be found [[Commands|here]].</p>
 
<p>A full list of available rcon commands can be found [[Commands|here]].</p>
 +
  
 
=Features=
 
=Features=
 +
 +
<p>The features list defines the seclev-controlled features that players matching this seclev have access to.</p>
 +
<p>Features are any game feature that has its access defined by seclevs - for example, the ability to join a server when it is full, or to use the map editor.</p>
 +
<p>They are currently all positive buffs, but in the future some will be added that enforce restrictions (blocking access to a given class, for example).</p>
  
 
{| class="wikitableShiny" border="1"
 
{| class="wikitableShiny" border="1"
Line 72: Line 93:
 
| ban_immunity
 
| ban_immunity
 
| Ban immunity.
 
| Ban immunity.
 +
|-
 +
| deny_join
 +
| Player is banned on the server. Works well as a replacement for whitelists (see [[#Advanced Usage|advanced usage]]).
 
|-
 
|-
 
| editor
 
| editor
 
| Use of map editor.
 
| Use of map editor.
 +
|-
 +
| freeze_immunity
 +
| Freeze immunity.
 +
|-
 +
| ignore_immunity
 +
| Ignore immunity.
 
|-
 
|-
 
| invincible
 
| invincible
Line 96: Line 126:
 
| mark_player
 
| mark_player
 
| Able to mark players to be kicked.
 
| Able to mark players to be kicked.
 +
|-
 +
| mute_immunity
 +
| Mute immunity.
 
|-
 
|-
 
| name_mouseover
 
| name_mouseover
 
| Can see player names when hovering cursor above them.
 
| Can see player names when hovering cursor above them.
 +
|-
 +
| name_mouseover_spectator
 +
| Can see player names when hovering cursor above them when in spectator.
 
|-
 
|-
 
| pingkick_immunity
 
| pingkick_immunity
Line 111: Line 147:
 
| spectator
 
| spectator
 
| Use of spectator mode.
 
| Use of spectator mode.
 +
|-
 +
| speedkick_immunity
 +
| Speedhack kick immunity (this is a temporary fix to work around modded servers that have speeded-up their classes in such a way that the speedhack detection gets false positives)
 
|-
 
|-
 
| view_collapses
 
| view_collapses
Line 120: Line 159:
 
| view_rcon
 
| view_rcon
 
| Can view non-silent rcon activity.
 
| Can view non-silent rcon activity.
 +
|-
 +
| vote_cancel
 +
| Enables the ability to cancel vote-kicks.
 
|-
 
|-
 
|}
 
|}
 +
 +
=Assign=
 +
 +
<p>The assign list defines the seclevs that players matching this seclev are able to assign other players to/from.</p>
 +
<p>A player is able to assign another player a seclev via /rcon /assignseclev [playername] [seclev ID] if they have the name of both that other user's current seclev and the seclev they wish to assign them in their own seclev's assign list. Seclev ID is a number that (should) correspond to the seclev's position in the seclev list, where the first is 0, the second is 1, etc. Use /rcon /printseclevs to see the seclev's with their IDs.</p>
 +
<p>You are also able to use /assignseclevid [player ID] [seclev ID], and you should grant access to this command if you want to make use of the admin menu for seclev assignment, as the menus use this command.</p>
  
 
=Advanced Usage=
 
=Advanced Usage=
Line 128: Line 176:
 
<p>To do this, first ensure that none of your non-admin levels have 'login' in their commands list. Then add 'login' (or 'ALL') to your lower-level admin seclev and make sure that it is assigned to your administrators by adding their names to the users list. Also ensure that your higher-level admin seclev is not assigned to your administrators by name but is assigned to the 'rcon' role and that it has 'logout' (or 'ALL') in its commands list.</p>
 
<p>To do this, first ensure that none of your non-admin levels have 'login' in their commands list. Then add 'login' (or 'ALL') to your lower-level admin seclev and make sure that it is assigned to your administrators by adding their names to the users list. Also ensure that your higher-level admin seclev is not assigned to your administrators by name but is assigned to the 'rcon' role and that it has 'logout' (or 'ALL') in its commands list.</p>
 
<p>Now when your administrators join your server they will have access to all their normal admin powers by default, but will be able to go up a level by logging into rcon (and back down again by using /rcon /logout). As they are the only ones with access to /login you can safely keep the password very easy to remember, too. You may find it useful to include features that you would only want to have active temporarily in this higher admin level - like invincibility.</p>
 
<p>Now when your administrators join your server they will have access to all their normal admin powers by default, but will be able to go up a level by logging into rcon (and back down again by using /rcon /logout). As they are the only ones with access to /login you can safely keep the password very easy to remember, too. You may find it useful to include features that you would only want to have active temporarily in this higher admin level - like invincibility.</p>
 +
 +
 +
<p>You are able to use seclevs in place of the whitelist by making use of the deny_join feature. By making your default seclev deny_join you have to explicitly add people to other seclevs without deny_join in order to grant access - essentially performing the same function as the whitelist. This is actually advised in preference to a whitelist as it has several benefits, including: allowing easy removal of people from the whitelist using in-game seclev assignment, not having to spread lists of players between the whitelist and seclevs and allowing the blacklist to be used at the same time so that temporary bans can be issued to your 'whitelisted' players if they break rules, without having to outright remove them from the list.</p>
 +
  
 
=Default Levels=
 
=Default Levels=
  
 
The default, hardcoded levels are equivalent to the following security level files:
 
The default, hardcoded levels are equivalent to the following security level files:
−
 
+
==superadmin.cfg==
−
<pre>
+
<syntaxhighlight lang="ini" enclose="div">
−
name = Server Admin
+
name = Super Admin
 
users =  
 
users =  
 
roles = rcon;
 
roles = rcon;
 
commands = ALL;
 
commands = ALL;
−
features = admin_color; always_change_team; ban_immunity; editor; join_full; kick_immunity; map_vote; mark_any_team; mark_player; name_mouseover; pingkick_immunity; silent_rcon; skip_votewait; spectator; view_collapses; view_console; view_rcon;
+
features = admin_color; always_change_team; ban_immunity; editor; freeze_immunity; ignore_immunity; join_full; kick_immunity; map_vote; mark_any_team; mark_player; mute_immunity; name_mouseover; pingkick_immunity; silent_rcon; skip_votewait; spectator; view_collapses; view_console; view_rcon;
−
</pre>
+
assign = admin; vip; normal; premium;
−
 
+
</syntaxhighlight>
−
<pre>
+
==admin.cfg==
−
name = KAG Staff
+
<syntaxhighlight lang="ini" enclose="div">
 +
name = Admin
 
users =  
 
users =  
 
roles = kagstaff;
 
roles = kagstaff;
−
commands = ban; banhost; banid; freezeid; help; kick; kickhid; kickhost; kickid; listbans; login; msg; nextmap; players; restartmap; swapid; unban; unbanhost; unfreezeid;
+
commands = assignseclev; assignseclevid; ban; banhost; banid; freezeid; help; kick; kickhid; kickhost; kickid; list; listbans; login; msg; mute; muteid; nextmap; players; printseclevs; restartmap; swapid; unban; unbanhost; unfreezeid; unmute; unmuteid;
−
features = always_change_team; ban_immunity; join_full; kick_immunity; map_vote; mark_any_team; mark_player; name_mouseover; pingkick_immunity; skip_votewait; spectator; view_collapses; view_rcon;
+
features = always_change_team; ban_immunity; freeze_immunity; ignore_immunity; join_full; kick_immunity; map_vote; mark_any_team; mark_player; mute_immunity; name_mouseover; pingkick_immunity; skip_votewait; spectator; view_collapses; view_rcon;
−
</pre>
+
assign = vip; normal; premium;
−
 
+
</syntaxhighlight>
−
<pre>
+
==guard.cfg==
 +
<syntaxhighlight lang="ini" enclose="div">
 
name = Guard
 
name = Guard
 
users =
 
users =
 
roles = guard;
 
roles = guard;
−
commands = ban; banhost; banid; freezeid; help; kick; kickhid; kickhost; kickid; listbans; login; players; swapid; unban; unbanhost; unfreezeid;
+
commands = ban; banhost; banid; freezeid; help; kick; kickhost; kickid; list; listbans; login; mute; muteid; players; swapid; unban; unbanhost; unfreezeid; unmute; unmuteid;
−
features = always_change_team; join_full; map_vote; mark_any_team; mark_player; name_mouseover; pingkick_immunity; skip_votewait; spectator; view_collapses;
+
features = always_change_team; freeze_immunity; ignore_immunity; join_full; map_vote; mark_any_team; mark_player; mute_immunity; name_mouseover; pingkick_immunity; skip_votewait; spectator; view_collapses;
−
</pre>
+
assign =
−
 
+
</syntaxhighlight>
−
<pre>
+
==vip.cfg==
 +
<syntaxhighlight lang="ini" enclose="div">
 +
name = VIP
 +
users =
 +
roles =
 +
commands = help; login;
 +
features = freeze_immunity; join_reserved; map_vote; mark_any_team; mark_player; pingkick_immunity; skip_votewait; spectator;
 +
assign =
 +
</syntaxhighlight>
 +
==premium.cfg==
 +
<syntaxhighlight lang="ini" enclose="div">
 +
name = Premium
 +
users =
 +
roles = premium;
 +
commands = help; login;
 +
features = map_vote; mark_player; spectator;
 +
assign =
 +
</syntaxhighlight>
 +
==normal.cfg==
 +
<syntaxhighlight lang="ini" enclose="div">
 
name = Normal
 
name = Normal
 
users =
 
users =
Line 163: Line 236:
 
commands = help; login;
 
commands = help; login;
 
features = map_vote; mark_player; spectator;
 
features = map_vote; mark_player; spectator;
−
</pre>
+
assign =
 +
</syntaxhighlight>

Latest revision as of 21:27, 8 December 2017

This page might not be up-to-date (build 1865).

King Arthur's Gold uses a system called 'Security Levels' (or 'seclevs' for short) to manage player access to various features on its servers. There are default, hardcoded levels setup but it is strongly advised that server owners take the time to setup their own specific seclev definitions.


Basics

The contents of the file autoconfig.cfg in kagServer (where kagServer is the path to the kagServer's directory) should look something like this:

security_whitelist_active = 0                                            # Set to 1 to allow only the names in the whitelist or 0 to disallow the names in the blacklist
security_whitelist = ../Security/whitelist.cfg                           # The file with the whitelist config
security_blacklist = ../Security/blacklist.cfg                           # The file with the blacklist config
security_ignorelist = ../Security/ignorelist.cfg                         # The file with the ignorelist config
security_seclevs = ../Security/seclevs.cfg                               # The file with the seclev config

The contents of the file defined by seclevs.cfg in kagServer/Security should look something like this (with additional commenting):

# If 0, defers to hardcoded settings
levels_active = 1

# The default level (that users will be assigned if they do not match any of the other levels) is the last one in this list.
levels_files = ../Security/superadmin.cfg; ../Security/admin.cfg; ../Security/guard.cfg; ../Security/vip.cfg; ../Security/premium.cfg; ../Security/normal.cfg;

If you set levels_active to 0 or the file is otherwise missing/unreadable, then default, hardcoded seclevs will be loaded for you.

levels_files should be a semi-colon-delimited list of files that define individual security levels. The ordering of this list matters for 2 reasons: 1) When users are being matched to a security level in order to determine their level of access, they will be matched to the first seclev in the list that matches either their username or their role. 2) When users do not match any security level they will be assigned to the last seclev in the list - this last level is essentially the default.

The contents of one of the files defined by levels_files should look something like this (all lists are semi-colon-delimited):

name = Name of the seclev
users = usernames; go; here;
roles = roles; go; here;
commands = rcon; commands; go; here;
features = features; go; here;
assign = seclevs; go; here;

The name variable simply provides the human-readable name of the seclev.

The users list defines usernames that will match to this seclev (if they haven't already matched to a seclev higher up the list).

The roles list defines roles that will match to this seclev (if they haven't already matched to a seclev higher up the list).

The commands list defines the rcon commands that players matching this seclev have access to.

The features list defines the seclev-controlled features that players matching this seclev have access to.

The assign list defines the seclevs that players matching this seclev are able to assign other players to/from.


If you make a change to your seclevs and want to reload the new configuration you can do so without restarting your server - just use /rcon /reloadseclevs (or /reloadsecurity) in the console (make sure you have access to that command in your seclev!

You can see all the currently loaded seclevs and who of the currently active players has been assigned to what seclev by using /rcon /printseclevs (you will need access to the command to use this, and access to the feature view_console to view the list)


A set of example seclev definition files has been included in your kagServer/Base/Security directory, with the extension .cfg.example. If you make a copy of these files and remove the .example extensions you will be left with a good start point for building up your own definitions.

Roles

The roles list defines roles that will match to this seclev (if they haven't already matched to a seclev higher up the list).

Roles are special flags that define what kind of user a player is.

There are 4 available: premium (premium players), guard (KAG guards), kagstaff (KAG staff) and rcon (people logged into rcon).

So if you were to have 'roles = guard; kagstaff' in a seclev, then all KAG Guards and members of the KAG Team would be matched to that seclev, if they hadn't already matched a seclev higher up the list.

The only one that can change mid-game is rcon, which will be active when a player logs into rcon (/rcon /login [password]) and become inactive again when they logout (/rcon /logout).


Commands

The commands list defines the rcon commands that players matching this seclev have access to.

For example, to enable the rcon command /kick, used for kicking players from the game, you would add 'kick' to the commands list

There is one special keyword used for enabling all rcon commands at once - 'ALL'. So in this case your commands list would look like:

commands = ALL;

Scripting commands (like waterLevel()) are not compatible with this system - if you want to use them you must have a seclev with the ALL keyword in its commands list

A full list of available rcon commands can be found here.


Features

The features list defines the seclev-controlled features that players matching this seclev have access to.

Features are any game feature that has its access defined by seclevs - for example, the ability to join a server when it is full, or to use the map editor.

They are currently all positive buffs, but in the future some will be added that enforce restrictions (blocking access to a given class, for example).

Feature Description
admin_color Show admin names in the red/orange admin color.
always_change_team Able to change team regardless of (im)balance.
ban_immunity Ban immunity.
deny_join Player is banned on the server. Works well as a replacement for whitelists (see advanced usage).
editor Use of map editor.
freeze_immunity Freeze immunity.
ignore_immunity Ignore immunity.
invincible Player will be invincible.
join_full Join full server.
join_reserved Join if reserved slots free. [Not currently available]
kick_immunity Kick immunity.
map_vote Able to vote to go to next map.
mark_any_team Able to mark players on any team - still need mark_player.
mark_player Able to mark players to be kicked.
mute_immunity Mute immunity.
name_mouseover Can see player names when hovering cursor above them.
name_mouseover_spectator Can see player names when hovering cursor above them when in spectator.
pingkick_immunity Ping kick immunity.
silent_rcon Your rcon activity is not posted to the console of those that can view it.
skip_votewait Skip the wait required to vote/mark players.
spectator Use of spectator mode.
speedkick_immunity Speedhack kick immunity (this is a temporary fix to work around modded servers that have speeded-up their classes in such a way that the speedhack detection gets false positives)
view_collapses View who caused collapses.
view_console Can view server console messages in your own console.
view_rcon Can view non-silent rcon activity.
vote_cancel Enables the ability to cancel vote-kicks.

Assign

The assign list defines the seclevs that players matching this seclev are able to assign other players to/from.

A player is able to assign another player a seclev via /rcon /assignseclev [playername] [seclev ID] if they have the name of both that other user's current seclev and the seclev they wish to assign them in their own seclev's assign list. Seclev ID is a number that (should) correspond to the seclev's position in the seclev list, where the first is 0, the second is 1, etc. Use /rcon /printseclevs to see the seclev's with their IDs.

You are also able to use /assignseclevid [player ID] [seclev ID], and you should grant access to this command if you want to make use of the admin menu for seclev assignment, as the menus use this command.

Advanced Usage

Because you can restrict access to every /rcon command, including /login itself, its possible to create two levels for your administrators that they can swap in and out of according to need.

To do this, first ensure that none of your non-admin levels have 'login' in their commands list. Then add 'login' (or 'ALL') to your lower-level admin seclev and make sure that it is assigned to your administrators by adding their names to the users list. Also ensure that your higher-level admin seclev is not assigned to your administrators by name but is assigned to the 'rcon' role and that it has 'logout' (or 'ALL') in its commands list.

Now when your administrators join your server they will have access to all their normal admin powers by default, but will be able to go up a level by logging into rcon (and back down again by using /rcon /logout). As they are the only ones with access to /login you can safely keep the password very easy to remember, too. You may find it useful to include features that you would only want to have active temporarily in this higher admin level - like invincibility.


You are able to use seclevs in place of the whitelist by making use of the deny_join feature. By making your default seclev deny_join you have to explicitly add people to other seclevs without deny_join in order to grant access - essentially performing the same function as the whitelist. This is actually advised in preference to a whitelist as it has several benefits, including: allowing easy removal of people from the whitelist using in-game seclev assignment, not having to spread lists of players between the whitelist and seclevs and allowing the blacklist to be used at the same time so that temporary bans can be issued to your 'whitelisted' players if they break rules, without having to outright remove them from the list.


Default Levels

The default, hardcoded levels are equivalent to the following security level files:

superadmin.cfg

name = Super Admin
users =
roles = rcon;
commands = ALL;
features = admin_color; always_change_team; ban_immunity; editor; freeze_immunity; ignore_immunity; join_full; kick_immunity; map_vote; mark_any_team; mark_player; mute_immunity; name_mouseover; pingkick_immunity; silent_rcon; skip_votewait; spectator; view_collapses; view_console; view_rcon;
assign = admin; vip; normal; premium;

admin.cfg

name = Admin
users =
roles = kagstaff;
commands = assignseclev; assignseclevid; ban; banhost; banid; freezeid; help; kick; kickhid; kickhost; kickid; list; listbans; login; msg; mute; muteid; nextmap; players; printseclevs; restartmap; swapid; unban; unbanhost; unfreezeid; unmute; unmuteid;
features = always_change_team; ban_immunity; freeze_immunity; ignore_immunity; join_full; kick_immunity; map_vote; mark_any_team; mark_player; mute_immunity; name_mouseover; pingkick_immunity; skip_votewait; spectator; view_collapses; view_rcon;
assign = vip; normal; premium;

guard.cfg

name = Guard
users =
roles = guard;
commands = ban; banhost; banid; freezeid; help; kick; kickhost; kickid; list; listbans; login; mute; muteid; players; swapid; unban; unbanhost; unfreezeid; unmute; unmuteid;
features = always_change_team; freeze_immunity; ignore_immunity; join_full; map_vote; mark_any_team; mark_player; mute_immunity; name_mouseover; pingkick_immunity; skip_votewait; spectator; view_collapses;
assign =

vip.cfg

name = VIP
users =
roles =
commands = help; login;
features = freeze_immunity; join_reserved; map_vote; mark_any_team; mark_player; pingkick_immunity; skip_votewait; spectator;
assign =

premium.cfg

name = Premium
users =
roles = premium;
commands = help; login;
features = map_vote; mark_player; spectator;
assign =

normal.cfg

name = Normal
users =
roles =
commands = help; login;
features = map_vote; mark_player; spectator;
assign =
Retrieved from "http://wiki.kag2d.com/index.php?title=Security_Levels&oldid=25416"